Drip irrigation pipe winding machine-manufacture,factory,supplier from China

(Total 24 Products for Drip irrigation pipe winding machine)
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  اتصل الآن
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  اتصل الآن
PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.
  اتصل الآن
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  اتصل الآن
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  اتصل الآن
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  اتصل الآن
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  اتصل الآن
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  اتصل الآن
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  اتصل الآن
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  اتصل الآن
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  اتصل الآن
Pipe ApplicationsMine industry.Tailings and mud transport, underground filling pipeline.Coal industry.Coal mine  gas pipe, water supply and drain pipe, ventilation pipes, grouting pipe, slime water in coal washer plant, coal slurry pipelines.Sea or lake salt chemical industry.Sea salt, brine transport pipeline.Thermal power.Fly coal ash, chemical water, recycled water transport pipeline.Petrochemical.Corrosive medium or crude oil pipeline.Food processing.Water and material delivery pipeline.River dredging.Dredging, pumping sands conveying pipe.Public utilities.Sewage discharge, water supp
  اتصل الآن
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  اتصل الآن
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  اتصل الآن
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  اتصل الآن
Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre
  اتصل الآن
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  اتصل الآن
With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.
  اتصل الآن
HDPE Pipe Production lineHDPE pipe extrusion line is developed by HUAYA based on European advanced technology and R&D experience of the plastic machinery for many years.
  اتصل الآن
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  اتصل الآن
Product Description:New generation UHMWPE pipe extrusion line uses patented equipments and technology of Huaya company, relizescontinuous extrusion of pipes.
  اتصل الآن
Pipe AdvantagesHigh wear resistance:It's 4-7 times of steel pipes, 3times of HDPE pipes, 4 times of nylon pipes.
  اتصل الآن
Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.
  اتصل الآن
To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.
  اتصل الآن
Relate News
HWYAA Company Earns Acclaim from Turkish Clients on January 4th Visit, Impressed by Fully Automated Flat Drip Tape Production Line and Woven Microspray Tape Manufacturing Line; Commends State-of-the-art Automatic Winding and Packaging System.
We tested a flat drip irrigation pipe production line successfully for our customer from Uzbekistan. The production speed of this line is 120/min . All PLC and servo adopts Siemens brand . So the production line is very stable . Huaya- the most professional manufacturer of drip irrigation pipe production lines . If you have any questions , pls feel free to contact us .Doubel station haul off ,punching device and inspector with alarm systemDoube station coiling machine ,automatic cut ,automatic change rolles
UHMWPE (ultra-high molecular weight) pipe making machine delivery to Ukraine kyiv .Hope everything will be getting better .
During the period from December 4th to 7th, HWYAA's fourth-generation strip-attached drip irrigation tape manufacturing machine and one-step formed prefabricated hole flat hose manufacturing machine, developed this year, made a remarkable appearance and received extensive recognition at PLASTEURASIA 2024. The fourth-generation inlaid strip-attached drip emitter drip irrigation T tape making machine has remarkable advantages.
Packaging film equipment is a kind of winding machine, which is mainly used on production lines. It is mainly used to wind the production line. It is unmanned. The packaging film equipment will have some common faults during operation. Let me introduce you in detail below.1. After the equipment is installed, it does not work when it is started. First, check the internal and external power supplies, and then check whether the PLC and inverter in the operation panel and the electric control cabinet are energized.
1. To remove the modified cylinder part from the original heater ring. 2. Measure the size of the cylinder, usually including the length of the circumference, calculate the need for insulating wadding, and after the initial estimation of the heating coil power, the position of the winding  is sufficient. 3.Wrap the insulating pad around the cylinder and tie it tightly with a heat-resistant bandage so that the thickness of the insulating pad is about 1.5-2.0cm.
On August 1, 2023, Saudi Arabian clients officially visited our factory to observe the fully automated winding and packaging production line for flat drip irrigation tape. Both parties engaged in in-depth communication and discussions, and the clients expressed their satisfaction with our company's technological strength and craftsmanship. This collaboration further enhances our influence in the international market. We look forward to further cooperation with our Saudi Arabian clients!Laiwu Huaya Polymer Sci.&Tech. Co., Ltd.
As a plastic machinery manufacturer, HWYAA is committed to providing high-quality blown film machines, fully automatic irrigation pipe production lines, and solutions to meet customer needs. In the past year, we have achieved proud accomplishments, launching advanced equipment and gaining recognition from our customers. Looking ahead, we will continue to innovate and improve, delivering high-quality products and services to our customers.Wishing everyone a healthy, happy, and successful New Year!HWYAA Plastic Machinery
Usually when we use the pipe production equipment, we often neglect the maintenance and maintenance, so today I will teach you how to clean some details of the pipe production equipment. The pipeline cleaning of pipe production equipment should pay attention to the removal of oil on the surface of the workpiece. During the maintenance process of pipe production equipment, it is often necessary to clean up the oil stains on its surface.The pipeline cleaning of pipe production equipment should pay attention to the removal of oil on the surface of the workpiece.
There are many kinds of plastic pipe materials, so they are widely used in various gas and liquid transportation projects. The equipment for the production of plastic pipes for pipes is shouldering a big mission. In order to ensure the production power and the output of pipe raw materials, the operators must do a good job of daily maintenance.The first thing in daily maintenance of ultra-high polymer pipe equipment is cleaning.
It is a new type of porogen to produce HDPE with prestressed corrugated pipe as raw material. Used in important tensioned prestressed concrete structures, rod insertion holes, good sealing performance, no leakage, ring stiffness, friction parameters, anti-aging, electrical corrosion, good elasticity and softness, not easy to break and gouge and build new connections Way, the connection way is more convenient.
Performance characteristics of PVC pipe production equipment:1. Light weight, convenient loading and unloading: PVC pipe is light in material, convenient to carry and construct, and save effort.2. Excellent chemical resistance: PVC pipes are acid-resistant, alkali-resistant, and corrosion-resistant, suitable for the chemical industry.3. Low fluid resistance: The wall surface of the PVC pipe is smooth and the fluid resistance is low. Its roughness coefficient is only 0.009, which is lower than other pipes. Under the same flow rate, the pipe diameter can be reduced.4.